Reference Guide

set community
Allows you to assign a BGP COMMUNITY attribute.
S4820T
Syntax
set community {community-number | local-as | no-advertise | no-
export | none} [additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community
{community-number | local-as | no-advertise | no-export | none}
command.
Parameters
community-
number
Enter the community number in AA:NN format where AA is
the AS number (2 bytes) and NN is a value specific to that
autonomous system.
local-AS Enter the keywords local-AS to drop all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise Enter the keywords no-advertise to drop all routes
containing the well-known community attribute of
NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export Enter the keywords no-export to drop all routes containing
the well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
none Enter the keyword none to remove the community attribute
from routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the
communities to already existing communities.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
288
Access Control Lists (ACL)