Reference Guide

Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
Dell#show ip as-path-access-lists
ip as-path access-list 1
permit ^$
permit ^\(.*\)$
deny .*
ip as-path access-list 91
permit ^$
deny .*
permit ^\(.*\)$
Dell#
IP Community List Commands
IP community list commands are supported on the S4820T platform.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
S4820T
Syntax
ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name
command.
Parameters
comm-list-
name
Enter a text string as the name of the community-list, up to
140 characters.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
300
Access Control Lists (ACL)