Reference Guide

0 0
0 0
1 0
0 0
2 0
0 0
3 0
0 0
4 0
0 0
5 0
0 0
6 0
0 0
7 0
0 0
show qos dcb-input
Displays the PFC configuration in a DCB input policy.
S4820T
Syntax
show qos dcb-input [dcb-input-policy-name]
Parameters
dcb-input-
policyname
Enter the PFC profile.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version
8.3.16.0
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4.(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
Example
(Summary)
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
534
Data Center Bridging (DCB)