Reference Guide

summary (OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced.
Usage
Information
Executing this command without the optional ring-id command clears the
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command executes. This command clears
the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Usage
Information
Executing this command without the optional ring-id command clears the
statistics counters on all the available rings. Dell Networking OS requires a
command line confirmation before the command is executed. This command
clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Example
(Summary)
Dell#show frrp summary
Ring-ID State Mode Ctrl_Vlan Member_Vlans
----------------------------------------------
2 UP Master 2 11-20, 25,27-30
31 UP Transit 31 40-41
50 Down Transit 50 32
Dell#
Example (1)
Dell#show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
680
Force10 Resilient Ring Protocol (FRRP)