Reference Guide

Version 7.8.1.0 Introduced on the S-Series

Usage

Information

You must include the colon (:) when entering this command.

After reformatting is complete, three empty directories are automatically created

on flash: CRASH_LOG_DIR, TRACE_LOG_DIR and NVTRACE_LOG_DIR.

CAUTION: This command deletes all files, including the startup

configuration file. So, after executing this command, consider saving the

running config as the startup config (use the write memory command or

copy run start command).

Commands

copy – copies the current configuration to either the startup-configuration file or

the terminal.

show file-systems – displays information about the file systems on the system.

fsck flash

Checks the flash file system for errors.

S4820T

Syntax

fsck flash:

fsck usbflash:

Defaults none

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version 9.1(0.0) Introduced on S4810 and Z9000.

Version

8.3.19.0

Introduced on S4820T.

Usage

Information

Include the colon (:) when entering this command. This command checks the

specified flash memory for errors. If errors are found, the command recommends

that you format the flash.

File Management