Reference Guide

CAUTION: If you elect to format the flash, all files – including the startup

configuration file – are lost. If you do decide to format the specified flash,

consider saving the running configuration as the startup configuration after

formatting the flash (use the write memory command or copy run start

command).

Commands

• copy — copy one file to another location.

• show file-systems — Display information about the file systems on the system.

rename

Rename a file in the local file system.

S4820T

Syntax

rename url url

Parameters

url Enter the following keywords and a filename:

• For a file on the internal Flash, enter flash:// followed

by the filename.

• For a file on an external USB drive, enter usbflash://

followed by the filename.

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on S-Series

Version 7.5.1.0 Introduced on C-Series

E-Series Original command

File Management