Reference Guide

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• Enter the keyword backup to view the backup interface
for this interface.
stack-unit unit-
id
(OPTIONAL) Enter the keywords stack-unit then the stack
member number. This option is available only on S-Series.
The range is from 0 to 5.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Support added for hybrid port/native VLAN, introduced on
the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following describes the show interfaces switchport command for the
following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged
(“False”), or hybrid (“Hybrid”), which supports both untagged
and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting
with Dell Networking OS version 7.6.1, this field can display
native VLAN membership by port 13/0.
784
Interfaces