Reference Guide

static
for the current static route
configuration
status
for the file status information
tacacs+
for the current TACACS+
configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group
configuration
trace-list
for the current trace-list configuration
uplink-
state-group
for the uplink state group
configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile
configuration
configured (OPTIONAL) Enter the keyword configuration to display
line card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
compressed (Optional) Enter the keyword compressed to display the
compressed group configuration. Displays the compressed
configuration by grouping all similar configurations. The
compression is done only for interface related
configurations.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.2.
(0.0)
Added support for the tunnel and EIS interface types.
Version 9.0.0.0 Added support for the VLT option.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
80
File Management