Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version

8.3.10.0

Added the ingress-port parameter for the S4810.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

Usage

Information

By default, Dell Networking OS distributes incoming traffic based on a hash

algorithm using the following criteria:

• IP source address

• IP destination address

• TCP/UDP source port

• TCP/UDP destination port

load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal

higig links.

S4820T

Syntax

[no] load-balance hg { ip-selection | ipv6-selection [source-ip

L4-source-port | L4-dest-port ] | mac [source-mac | source-

port-id | source-module-id | dest-mac | dest-port-id | dest-

module-id | vlan | ethertype | source-dest-mac ] | tunnel

[ipv4-over-ipv4 | ipv4-over-gre-ipv4 | mac-in-mac]}

872

IPv4 Routing