Users Guide

MIB Object OID Description
entAliasMappingIdentier 1.3.6.1.2.1.47.1.3.2.1.2 Identies a particular conceptual row
associated with the indicated
entPhysicalIndex and
entLogicalIndex pair.
Viewing the entAliasMappingTable MIB
• To view the entAliasMappingTable generated by the system, use the following command.
snmpwalk -v 2c -c public -On 10.16.150.97 1.3.6.1.2.1.47.1.3.2.1
.1.3.6.1.2.1.47.1.3.2.1.2.5.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097157
.1.3.6.1.2.1.47.1.3.2.1.2.9.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097669
.1.3.6.1.2.1.47.1.3.2.1.2.13.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098181
.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693
.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205
.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717
.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228
.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356
.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484
MIB Support for LAG
Dell Networking provides a method to retrieve the congured LACP information (Actor and Partner). Actor (local interface) is to designate
the parameters and ags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending node’s view
of its peer parameters and ags. LACP provides a standardized means for exchanging information, with partner systems, to form a link
aggregation group (LAG). The following table lists the related MIB objects:
Table 99. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link aggregation
module for managing 802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters and
indexed by the ifIndex of the Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value carrying
the individual MAC address assigned to the
Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated with
the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identier for
the system that contains the Aggregator.
Simple Network Management Protocol (SNMP) 855