Users Guide

Use the ip ftp password command when you use the ftp: parameter in the copy command.
Related
Commands
• copy — copy files.
• ip ftp username — sets the user name for the FTP sessions.
ip ftp vrf
Configures an FTP client with a VRF that is used to connect to the FTP server.
Syntax
ip ftp [vrf {vrf-name | management}]
To undo the FTP client configuration, use the ip ftp [vrf vrf-name] command.
Parameters
vrf-name Enter the vrf-name to specify the VRF that is used by the FTP client.
management Enter the keyword management to specify that the VRF used by the FTP client is a
management VRF.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage Information Use this command to make the FTP clients VRF-aware. The VRF name that you specify is used by the FTP
client to reach the FTP server. If no VRF name is specified, then the default VRF is used.
ip ftp source-interface
Specify an interface’s IP address as the source IP address for FTP connections.
Syntax
ip ftp source-interface interface
To delete an interface, use the no ip ftp source-interface interface command.
Parameters
interface Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Control and Monitoring 107