Users Guide

• For OSPF, you can set the resolution in the range 1 to 1592, where the default is 1.

• The resolution value used to map static routes is not configurable. By default, Dell Networking OS

assigns a metric of 0 to static routes.

• The resolution value used to map RIP routes is not configurable. The RIP hop-count is automatically

multiplied by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which

considers the route to be DOWN.

Commands

• threshold metric – configure the metric threshold used to determine the UP and/or DOWN state of a

tracked route.

• track ipv6 route metric threshold – configure object tracking on the threshold of an IPv6 route

metric.

Object Tracking 1111