Users Guide

adv-router ip-
address
(OPTIONAL) Enter the keywords adv-router and the ip-address to display only
the LSA information about that router.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.1 Introduced on the E-Series.
Usage Information The following describes the show ip ospf process-id database opaque-area command shown
in the following example.
Item Description
LS Age Displays the LSA’s age.
Options Displays the optional capabilities available on router. The following options can be
found in this item:
• TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS
External LSAs.
LS Type Displays the LSA’s type.
Link State ID Displays the Link State ID.
Advertising Router Identifies the advertising router’s ID.
Checksum Displays the Fletcher checksum of the LSA’s complete contents.
Length Displays the length in bytes of the LSA.
Open Shortest Path First (OSPFv2 and OSPFv3) 1167