Users Guide

• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
S4820T
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan
command.
Parameters
host Enter the keyword host to configure the selected port or port channel as an
isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to configure the selected port or port channel
as an promiscuous interface.
trunk Enter the keyword trunk to configure the selected port or port channel as a
trunk port in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
The assignment of the various PVLAN port types to port and port channel (LAG) interfaces is shown in the
following example.
Private VLAN (PVLAN) 1276