Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Usage Information You can attach a single policy-map to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
NOTE: The service-policy commands are not allowed on a port channel. The service-
policy input policy-map-name command and the service-class dynamic dot1p
command are not allowed simultaneously on an interface. However, the service-policy input
command (without the policy-map-name option) and the service-class dynamic dot1p command
are allowed on an interface.
Related
Commands
• policy-map-input — creates an input policy map.
service-policy output
Apply an output policy map to the selected interface.
S4820T
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output policy-
map-name command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
Quality of Service (QoS) 1321