Users Guide

key [encryption-
type] key
(OPTIONAL) Enter the keyword key then an optional encryption-type and a string
up to 42 characters long as the authentication key. The RADIUS host server uses
this authentication key and the RADIUS daemon operating on this switch.
For the encryption-type, enter either zero (0) or 7 as the encryption type for the
key entered. The options are:
• 0 is the default and means the password is not encrypted and stored as clear
text.
• 7 means that the password is encrypted and hidden.
Configure this parameter last because leading spaces are ignored.
Defaults Not configured.
Command Modes
• RADIUS SERVER GROUP
• CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added support for IPv6.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage Information
To configure any number of RADIUS server hosts for each server host that is configured, use this
command. Dell Networking OS searches for the RADIUS hosts in the order they are configured in the
software.
The global default values for the timeout, retransmit, and key optional parameters are applied,
unless those values are specified in the radius-server host or other commands. To return to the
global default values, if you configure the timeout, retransmit, or key values, include those keywords
when using the no radius-server host command syntax.
Security 1438