Users Guide

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In
addition, the OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip
ssh rsa-authentication my-authorized-keys device://filename command).
ip ssh vrf
Specify a VRF for an outgoing SSH connections.
Syntax
ip ssh vrf vrf-name
To delete a VRF for an outgoing SSH connection, use the no ip ssh vrf vrf-name command.
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to configure that VRF for an
outgoing SSH session.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage Information
If you configure a VRF for an SSH session, then you need not explicitly mention the same VRF for the SSH
client sessions intended for that VRF. The vrf attribute in the ip ssh vrf command is applicable for
both the SSH client as well as the COPY (SCP) commands.
Security 1475