Users Guide

Usage Information
The optional parameters must be provided in the following order: city state country postalcode.
If specified in a different order, the command returns an error as follows:
Dell(conf-supportassist-cmpy-test)# address city Minneapolis postalcode 55344
country USA state Minnesota
^
% Error: Invalid input at "^" marker.
This command is optional for SupportAssist service configuration.
Example
Dell(conf-supportassist-cmpy-test)# address city Minneapolis state Minnesota
country USA postalcode 55344
street-address
Configure the street address information for the company.
Syntax
street-address {address1} [address2]…[address8]
To remove the street address, use the no street-address command.
Parameters
address1 Enter the street address for the company.
address2..address
8
(OPTIONAL) Enter the street address of the company site. Up to 8 fields are
allowed.
Command Modes SUPPORTASSIST COMPANY
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage Information This command is optional for SupportAssist service configuration.
territory
Configure the territory and set the coverage for the company site.
Syntax
territory company-territory
To remove the company territory information, use the no territory command.
Parameters
company-territory Enter the territory name for the company. To include a space, enter a space
within double quotes.
Command Modes SUPPORTASSIST COMPANY
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
SupportAssist 1614