Users Guide

vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are
excluded from doing proxy gateway. The value can be a single VLAN ID, comma-
separated VLAN IDs, a range of VLAN IDs, or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address of a VLT peer in a remote VLT domain to associate with the static
VLT proxy gateway and exclude a VLAN, or a range of VLANs, from proxy routing.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)# remote-mac-address 00:01:e8:06:95:ac
exclude-vlan 3
Dell(conf-vlt-domain-proxy-gw-static)#
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs
you want to exclude from VLT proxy gateway.
S4820T
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel.
interface-
identifier
Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value
can be a single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a
combination. For example:
VLT Proxy Gateway 1700