Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1701

Comma-separated: 3, 4, 6

Range: 5-10

Combination: 3, 4, 5-10, 8

Command Modes VLT DOMAIN PROXY GW LLDP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

Usage Information You must configure the VLT port channel interface which is connecting to the remote VLT domain as

peer-domain-link. You can also configure the VLANs you want to exclude from the VLT proxy gateway.

Example

Dell(conf)#vlt-domain 1

Dell(conf-vlt-domain)#proxy-gateway lldp

Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-channel 20 exclude-

vlan 3

proxy-gateway peer-timeout

Enables the VLT node to timeout the transmission of the peer MAC address when the VLT peer is down.

S4820T

Syntax

[no] peer-timeout value

Parameters

value Enter the timeout value (in seconds). The range is from 1 to 65535. The default is

infinity.

Default Infinity