Users Guide

Version Description
6.5.10 Expanded to include the optional QoS order priority for the ACL entry.
Usage Information
The order option is relevant in the context of the Policy QoS feature only. For more information, see the
“Quality of Service” section of the Dell Networking OS Configuration Guide.
Related
Commands
• deny — assign a IP ACL filter to deny IP packets.
• ip access-list standard — create a standard ACL.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment}
Parameters
ipv4 | ipv6 | mac Enter the keyword ipv4or mac to identify the access list type to resequence.
access-list-name Enter the name of a configured IP access list.
StartingSeqNum Enter the starting sequence number to resequence. The range is from 0 to
4294967290.
Step-to-
Increment
Enter the step to increment the sequence number. The range is from 1 to
4294967290.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series (IPv6).
8.1.1.0 Introduced on the E-Series (IPv4).
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
were up to 16 characters long.
Access Control Lists (ACL) 191