Users Guide

buffer Enter the keyword buffer. To display the total buffer statistics for the stack unit,
enter the keyword total-buffer. To display buffer statistics for a all interface,
enter the keyword
interface followed by the keyword all.
To display total buffer information for the port, enter the keywords buffer-info.
To display a queue range, enter 0 to 14 for a specfic queue or all.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics then the keywords stack
port and its number, from 0 to 63 to display the data plane statistics, which
shows the High Gig (
Higig) port raw input/output counter statistics to which the
stacking module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management
plane input/output counter statistics of the pseudo party bus interface.
cpu sata-interface
statistics
Enter the keywords cpu sata-interface statistics to display the sata
interface error counter statistics.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the optional keyword unit unit-number to display the internal drop
counters of the specified port pipe.
fpga register Enter the keyword to display the register value of the fpga register.
unit unit-number
{counters | details
| port-stats [detail]
| register}
Enter the keyword unit then a number and then enter one of the keywords to
troubleshoot errors on the selected port-pipe and to give status on why a port is
not coming up to register level.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Replaced the keyword port with interface.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modified the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Debugging and Diagnostics 528