Users Guide

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
lease time Enter the keyword lease then the amount of time the IP address are leased. The
range is from 1 to 4294967295.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
• show ip dhcp snooping — display the contents of the DHCP binding table.
IPv6 DHCP Snooping Binding
Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-address
interface interface-type | interface-number lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use the [no] ipv6 dhcp
snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease valuecommand.
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is
leasing the IPv6 address.
vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range
is from 2 to 4094.
ipv6 ipv6-address Enter the keyword ipv6 then the IPv6 address that is leased to the client.
Dynamic Host Configuration Protocol (DHCP) 568