Users Guide

• hash-algorithm linecard 2 ip-sa-mask 00 ip-da-mask aa
The different hash algorithms are based on the number of Port Channel members and packet values. The
default hash algorithm (number 0) yields the most balanced results in various test scenarios, but if the
default algorithm does not provide a satisfactory distribution of traffic, use the hash-algorithm command
to designate another algorithm.
When a Port Channel member leaves or is added to the Port Channel, the hash algorithm is recalculated
to balance traffic across the members.
hash-algorithm ecmp
Change the hash algorithm used to distribute traffic flows across an ECMP (equal-cost multipath routing) group.
S4820T
Term heading Description heading
Syntax
hash-algorithm ecmp {crc-upper} | {dest-ip} | {lsb}
To return to the default hash algorithm, use the no hash-algorithm ecmp command.
Parameters
crc-upper Uses the upper 32 bits of the key for the hash computation. The default is crc-
lower.
dest-ip Uses the destination IP for ECMP hashing. The default is enabled.
lsb Returns the LSB of the key as the hash. The default is crc-lower.
Defaults
• crc-lower
• dest-ip enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Equal Cost Multi-Path (ECMP) 589