Users Guide

To disable debugging, use the no debug frrp {event | packet | detail} {ring-id}
[countnumber] command.
Parameters
event Enter the keyword event to display debug information related to ring protocol
transitions.
packet Enter the keyword packet to display brief debug information related to control
packets.
detail Enter the keyword detail to display detailed debug information related to the
entire ring protocol packets.
ring-id (Optional) Enter the ring identification number. The range is from 1 to 255.
count number Enter the keyword count then the number of debug outputs. The range is from 1
to 65534.
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug
information.
description
Enter an identifying description of the ring.
S4820T
Syntax
description Word
Force10 Resilient Ring Protocol (FRRP) 618