Users Guide

NOTE: This command also enables you to clear the port configurations
corresponding to a range of ports. However, for Open Networking (ON)
platforms the notation for specifying port range in the command is
different from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range.
For example, if you want to clear the port configurations corresponding to all
ports between 1 and 4, specify the port range as show interfaces
interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport]
- slot/port/[subport]
. For example, if you want to clear the port
configurations corresponding to all ports between 1 and 4, specify the port
range as show interfaces interface-type 1/1/1 - 1/1/4.
vrrp [ipv6 {vr-id} |
vr-id]
(OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To
clear the counters of VRRP groups on all IPv6 interfaces, enter ipv6. To clear the
counters of a specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear unknown source
address (SA) drop counters when MAC learning limit is configured on the
interface.
vlan vlan-id Enter the keyword vlan followed by the interface VLAN number. The range is
from 1 to 4094.
Defaults Without an interface specified, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Added support to clear the interface configurations corresponding to a range of
ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Added the vlan parameter.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series. Prior to the release, 2094 was
supported.
Interfaces 682