Users Guide

Te 0/45 Yes No 0 0 0 0
Te 0/46 Yes No 0 0 0 0
Te 0/47 Yes No 0 0 0 0
Fo 0/48 N/A - - - - -
Te 0/52 N/A - - - - -
Te 0/53 N/A - - - - -
Te 0/54 N/A - - - - -
Te 0/55 N/A - - - - -
Fo 0/56 N/A - - - - -
Fo 0/60 N/A - - - - -
<<Output Truncated>>
Example for a specific interface
S4820T
Dell#show interfaces tengigabitethernet 0/5 eee statistics
Port EEE LPI TxLPIEventCount TxLPIDuration RxLPIEventCount
RxLPIDuration
Te 0/5 Yes Yes 12 32546138 0 0
Related
Commands
• show interfaces — display information on a specific physical interface or virtual interface.
show interfaces phy
Display auto-negotiation and link partner information.
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
tengigabitethernet Enter the keyword tengigabitethernet then the slot or port information.
NOTE: This command also enables you to view information corresponding
to a range of ports. However, for Open Networking (ON) platforms the
notation for specifying port range in the command is different from how
you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range.
For example, if you want to display information corresponding to all ports
between 1 and 4, specify the port range as
show interfaces interface-
type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport]
- slot/port/[subport]. For example, if you want to display information
corresponding to all ports between 1 and 4, specify the port range as show
interfaces
interface-type 1/1/1 - 1/1/4.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.9(0.0) Added support to display the interface configurations corresponding to a range of
ports.
9.8(0.0P5) Introduced on the S4048-ON.
Interfaces 731