Users Guide

48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
Dell#
upgrade
Upgrade the bootflash image or system image of the management unit.
Syntax
upgrade {boot | system} {ftp: | scp: | tftp: | flash: {A: |B:} | stack-unit |
usbflash | slot0:} file-url
Parameters
boot Enter the keyword boot to change the boot image.
system Enter the keyword system to change the system image.
ftp: After entering the keyword ftp:, you can either follow it with the location of the
source file in this form: //userid:password@hostip/filepath or press Enter
to launch a prompt sequence.
scp: After entering the keyword scp:, you can either follow it with the location of the
source file in this form: //userid:password@hostip/filepath or press Enter
to launch a prompt sequence.
slot0: After entering the keyword slot0:, you can either follow it with the location of
the source file in this form: //hostlocation/filepath or press Enter to launch
a prompt sequence.
tftp: After entering the keyword tftp:, you can either follow it with the location of the
source file in this form: //hostlocation/filepath or press Enter to launch a
prompt sequence.
flash: After entering the keyword flash:, you can either follow it with the location of
the source file in this form: flash//filepath or press Enter to launch a prompt
sequence.
A: | B: Enter the partition to upgrade from the flash.
stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.
file-url Enter the following location keywords and information to upgrade using an Dell
Networking OS image other than the one currently running:
• To specify an Dell Networking OS image on the internal flash, enter flash://
file-path/filename.
• To specify an Dell Networking OS image on an FTP server, enter ftp://
user:password@hostip/filepath.
• To specify an Dell Networking OS image on the external flash, enter slot0://
file-path/filename.
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
.
where hostip is either an IPv4 dotted decimal address or an IPv6 URI [x:x:x:x::x]
format address.
Defaults none
Command Modes EXEC Privilege
File Management 84