Users Guide

IPv6 Basics

IPv6 basic commands are supported on the Dell Networking OS.

NOTE: For information about the Dell Networking OS version and platform that supports IPv6 in each software feature, see

the IPv6 Addressing section in the Dell Networking OS Configuration Guide.

Topics:

• clear ipv6 fib

• clear ipv6 route

• clear ipv6 mld_host

• maximum dynamic-routes-ipv6

• ipv6 address autoconfig

• ipv6 address

• ipv6 address eui64

• ipv6 control-plane icmp error-rate-limit

• ipv6 flowlabel-zero

• ipv6 host

• ipv6 name-server

• ipv6 nd dad attempts

• ipv6 nd dns-server

• ipv6 nd prefix

• ipv6 route

• ipv6 unicast-routing

• show ipv6 cam stack-unit

• show ipv6 control-plane icmp

• show ipv6 fib stack-unit

• show ipv6 flowlabel-zero

• show ipv6 interface

• show ipv6 management-route

• show ipv6 mld_host

• show ipv6 route

• trust ipv6-diffserv

clear ipv6 fib

Clear (refresh) all forwarding information base (FIB) entries on a stack unit.

S4820T

Syntax

clear ipv6 fib [vrf vrf-name]| stack-unit unit-number

IPv6 Basics 862