Users Guide

Version Description
8.4.1.0 Introduced on the C- and E-Series.
8.3.7.0 Introduced on the S4810.
Example
Dell# show ipv6 management-route
IPv6 Destination Gateway State
---------------- ------- -----
2001:34::0/64 ManagementEthernet 0/0 Connected
2001:68::0/64 2001:34::16 Active
Dell#
show ipv6 mld_host
Display the IPv6 MLD host counters.
S4820T
Syntax
show ipv6 mld_host
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The following describes the show ipv6 mld-host command shown in the following example.
Field Description
Valid MLD Packets The total number of packets received and sent from the last time the elapsed time
was cleared.
Reports The total number of reports (queries and unsolicited reports generated from joins
or leaves) that have been received or sent.
Leaves The number of Multicast leaves that have been sent.
MLDv1 queries The number of MLDv1 queries that have been received.
MLDv2 queries The number of MLDv2 queries that have been received.
Malformed
Packets
The number of MLDv1 and MLDv2 packets that do not match the requirement for
a valid MLD packet.
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
IPv6 Basics 884