Users Guide

Version Description
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), configure the default-information originate
command.
Changing or disabling a keyword in this command does not affect the state of the other command
keywords.
When an LSP with an internal metric is received, the Dell Networking OS considers the route cost while
considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the distribute-list out command to ensure that
the routes are properly passed to the receiving routing protocol.
How a metric value assigned to a redistributed route is advertised depends on how on the configuration
of the metric-style command. If the metric-style command is set for Narrow or Transition mode
and the metric value in the
redistribute command is set to a number higher than 63, the metric value
advertised in LSPs is 63. If the metric-style command is set for Wide mode, the metric value in the
redistribute command is advertised.
Related
Commands
• default-information originate — generate a default route for the IS-IS domain.
• distribute-list out — suppress networks from being advertised in updates. This command filters
redistributed routing information.
redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-value]
[metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate
parameters.
Parameters
AS number Enter a number that corresponds to the autonomous system number. The range
is from 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes
only. This setting is the default.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external| internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
• external
Intermediate System to Intermediate System (IS-IS) 943