Users Guide

To return to the default values, use the no redistribute ospf process-id [level-1|
level-1-2 | level-2] [match {internal | external}] [metric metric-value]
[metric-type {external | internal}] [route-map map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to be redistributed. The
range is from 1 to 65355.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes.
This setting is the default.
match {external |
internal}
(OPTIONAL) The command used for OSPF to route and redistribute into other
routing domains. The values are
• internal
• external
route-map map-
name
map-name is an identifier for a configured route map. The route map should filter
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a
keyword, but fail to list route map tags, no routes are imported.
Defaults See Parameters.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS) 945