Concept Guide

Table 112. Global MIB Objects for Port Security
MIB Object OID Access or Permission Description
dellNetGlobalPortSecurityMode 1.3.6.1.4.1.6027.3.31.1.1.1 read-write Enables or disables port security feature
globally on the device.
dellNetGlobalTotalSecureAddress 1.3.6.1.4.1.6027.3.31.1.1.2 read-only Displays the total number of MAC
addresses learnt or congured in the
device.
dellNetGlobalClearSecureMacAd
dresses
1.3.6.1.4.1.6027.3.31.1.1.3 read-write Deletes all the secured MAC addresses in
the system based on the specic type
(sticky or dynamic).
dellNetGlobalResetViolationStatu
s
1.3.6.1.4.1.6027.3.31.1.1.4 read-write Resets the violation status (Err-disabled
state) of all violated interfaces based on
the specied type (MAC limit or station
move violation).
MIB support for interface level port security
The MIB table dellNetPortSecIfConfigTable is used to achieve port security feature (MAC address learning limit) on an interface.
NOTE
:
Port Security is not supported in VLT port channels.
The following table shows the MIB objects of the table dellNetPortSecIfConfigTable. The OID of the MIB table is
1.3.6.1.4.1.6027.3.31.1.2.1.
Table 113. Interface level MIB Objects for Port Security
MIB Object OID Access or Permission Description
dellNetPortSecIfPortSecurityEna
ble
1.3.6.1.4.1.6027.3.31.1.2.1.1.1 read-only Species if the port security feature is
enabled or disabled on an interface.
dellNetPortSecIfPortSecuritySta
tus
1.3.6.1.4.1.6027.3.31.1.2.1.1.2 read-only Represents the port security status of
an interface.
dellNetPortSecIfSecureMacLimit 1.3.6.1.4.1.6027.3.31.1.2.1.1.3 read-write Maximum number (N) of MAC
addresses to be secured on the
interface
dellNetPortSecIfCurrentMacCou
nt
1.3.6.1.4.1.6027.3.31.1.2.1.1.4 read-only Current number of MAC addresses
learnt or congured on this interface
dellNetPortSecIfStationMoveEn
able
1.3.6.1.4.1.6027.3.31.1.2.1.1.5 read-write Enable or disable station movement on
the dynamically secured MAC addresses
learnt on the interface.
dellNetPortSecIfSecureMacViola
tionAction
1.3.6.1.4.1.6027.3.31.1.2.1.1.6 read-write Determines the action to be taken when
MAC limit violation occurs in the system.
dellNetPortSecIfStmvViolationA
ction
1.3.6.1.4.1.6027.3.31.1.2.1.1.7 read-write Determines the action to be taken when
either dynamic or static MAC limit
violation occurs in the system.
894 Simple Network Management Protocol (SNMP)