Owners Manual

When a channel member is added to a port-channel and there is not enough ACL
CAM space, the MAC limit functionality on that port-channel is undefined. When
this occurs, un-configure the existing configuration first and then reapply the limit
with a lower value.
Related
Commands
mac learning-limit mac-address-sticky — Replaces deprecated no-station-move
parameter.
show mac learning-limit — displays MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
S4820T
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown}
command.
Parameters
log Enter the keyword log to generate a syslog message on a
learning-limit violation.
shutdown Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Defaults none
Command
Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Layer 2
1075