Owners Manual

mac learning-limit station-move-violation
Specify the actions for a station move violation.
S4820T
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
shutdown-
original
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults none
Command
Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Layer 2
1077