Owners Manual

Parameters
boot Enter the keyword boot to copy the boot image from the
management unit to the designated stack members.
system Enter the keyword system to copy the Dell Networking OS
image from the management unit to the designated stack
members.
stack-unit Enter the stack-unit number. For the S4810, the range is
from 0 to 11.
all Enter the keyword all to copy the designated image to all
stack members.
A Enter the keyword A to upgrade all stacked units in System A
(
S4820T only).
B Enter the keyword B to upgrade all stacked units in System B
(S4820T only).
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information
To reboot using the new image, use the upgrade boot system stack-unit
command.
Related
Commands
• reload — reboots Dell Networking OS.
• reset stack-unit — resets the designated stack member.
• show system (S-Series and Z-Series) — displays the status of all stack members
or a specific member.
• show version — displays the current Dell Networking OS version information on
the system.
• upgrade (S-Series management unit and Z-Series) — upgrades the bootflash
image or system image of the S-Series management unit.
Stacking
1701