Owners Manual

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
Save your changes before resetting the system or all your changes will be lost.
save
Save configurations created in uBoot.
Syntax
save
Command
Modes
uBoot
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
Save your changes before resetting the system or all your changes will be lost.
setenv
Configure system settings.
Syntax
setenv [gatewayip address | primary_image f10boot location |
secondary_image f10boot location | default_image f10boot
location | ipaddre address | ethaddr address | enablepwdignore
| stconfigignore]
Parameters
gatewayip
address
Enter the IP address for the default gateway.
u-Boot
1747