Owners Manual

ethernet cfm mip
Create a maintenance intermediate point (MIP).
Syntax
ethernet cfm mip domain {name | level} ma-name name
Parameters
domain [name |
level]
Enter the keyword domain then the domain name or domain
level.
ma-name
name
Enter the keyword ma-name then the name of the
maintenance association.
Defaults none
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
mep cross-check
Enable cross-checking for a MEP.
Syntax
mep cross-check mep-id
Parameters
mep-id Enter the MEP ID. The range is from 1 to 8191.
Defaults none
Command
Modes
ECFM DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
802.1ag
179