Owners Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

561

562

563

564

565

566

567

568

569

570

show stack-unit stack-ports ets details

Displays the ETS configuration applied to egress traffic on stacked ports, including ETS Operational mode

on each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and

scheduler type.

Syntax

show stack-unit {all | stack-unit} stack-ports {all | port-

number} ets details

Parameters

stack-unit Enter the stack unit identification.

port-number Enter the port number.

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.

Example

(Summary)

Dell(conf)# show stack-unit all stack-ports all ets details

Stack unit 1 stack port all

Max Supported TC Groups is 4

Number of Traffic Classes is 1

Admin mode is on

Admin Parameters:

--------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

------------------------------------------------

0 0,1,2,3,4,5,6,7 100% ETS

1 - -

2 - -

3 - -

4 - -

5 - -

6 - -

7 - -

8 - -

Stack unit 2 stack port all