Owners Manual

stack-port all Enter the port number of a port in a switch stack.
Default None
Command
Modes
CONFIGURATION mode
Command
History
Version Description
9.3(0.0) Introduced on the S4810 and S4820T platforms.
Usage
Information
You can configure up to a maximum of four lossless (PFC) queues. By configuring
four lossless queues, you can configure four different priorities and assign a
particular priority to each application that your network is used to process. For
example, you can assign a higher priority for time-sensitive applications and a
lower priority for other services, such as file transfers. You can configure the
amount of buffer space to be allocated for each priority and the pause or resume
thresholds for the buffer. This method of configuration enables you to effectively
manage and administer the behavior of lossless queues.
Example
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-
ports all test
show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax
show qos dcb buffer-threshold {name}
Parameters
name Enter the name of the profile, which can be a string of up to
32 characters in length.
Command
Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform.
Usage
Information
The following table describes the output fields displayed for the show command:
588
Data Center Bridging (DCB)