Owners Manual

buffering is enabled, the limit per port for queues depends on the availability of the
buffer.
Example
Dell(conf)#dcb pfc-total-buffer-size 5000
Dell(conf)#dcb pfc-total-buffer-size 4000 %ERROR: Total pfc
buffer size configured cannot accommodate existing buffer
requirement in the system.
show running-config dcb-buffer-threshold
Displays the DCB buffer threshold details in the running configuration.
Syntax
show running—config buffer-threshold
Command
Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform.
Usage
Information
The following table describes the output fields displayed for the show running-
config dcb-buffer-threshold command:
Field Description
Profile name Name of the DCB buffer threshold
profile
Priority The priority of the queue for which the
buffer space settings apply
buffer-size Ingress buffer size
pause-threshold-value Buffer limit at which the port sends the
pause to peer in KB.
resume-threshold-value Buffer offset limit at which the port
resumes the peer in KB.
Example
Dell#show run buffer-threshold
!
dcb-buffer-threshold test1
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
pfc priority 0 buffer-size 80 pause-threshold 50
!
dcb-buffer-threshold test3
Data Center Bridging (DCB)
597