Owners Manual

Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage
Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This reboot is an
automatic process. A warning message appears when the offline stack-unit
command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Related
Commands
show environment (S-Series) — views the S-Series system component status (for
example, temperature, voltage).
Buffer Tuning Commands
The following sections detail the buffer tuning commands.
WARNING: Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning
commands without first contacting the Dell Networking Technical Assistance Center (TAC).
buffer-profile (Configuration)
Create a buffer profile that can be applied to an interface.
S4820T
Syntax
buffer-profile {fp | csf] profile-name {global {1Q | 4q}
Debugging and Diagnostics
605