Owners Manual

Parameters
fp Enter the keyword fp to create a buffer profile for the Field
Processor.
csf Enter the keyword csf to create a buffer profile for the
Switch Fabric Processor.
profile-name Create a name for the buffer profile,
global Apply one of two pre-defined buffer profiles to all of the
port-pipes in the system.
1Q Enter the keyword 1Q to choose a pre-defined buffer profile
for single queue (for example, non-QoS) applications.
4Q Enter the keyword 4q to choose a pre-defined buffer profile
for four queue (for example, QoS) applications.
Defaults Dynamic
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(0.2) Changed the default value from global 4q to Dynamic.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
7.8.1.0 Added the global keyword.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
Usage
Information
The buffer-profile global command fails if you have already applied a
custom buffer-profile on an interface. Similarly, when you configure buffer-
profile global
, you cannot not apply buffer-profile on any interface.
If the default buffer-profile is active, Dell Networking OS displays an error message
instructing you to remove the default configuration using the no buffer-
profile global
command.
Reload the system for the global buffer-profile to take effect.
606
Debugging and Diagnostics