Owners Manual

• auto-negotiation enabled* speed 1000 or auto

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

• auto-negotiation enabled* speed 1000 or auto

Port 1

• auto-negotiation enabled* speed 1000 or auto

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

• auto-negotiation enabled speed 100

• auto-negotiation disabled speed 100

Link Status Between Port 1 and Port 2

• Up at 1000 Mb/s

• Up at 100 Mb/s

• Down

* You cannot disable auto-negotiation when the speed is set to 1000 or auto.

keepalive

Send keepalive packets periodically to keep an interface alive when it is not transmitting data.

S4820T

Syntax

keepalive

To stop sending keepalive packets, use the no keepalive command.

Defaults Enabled.

Command

Modes

INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

Interfaces

785