Reference Guide
102 | 802.1X
www.dell.com | support.dell.com
Re-authenticating a Port
Periodic Re-authentication
After the supplicant has been authenticated, and the port has been authorized, the authenticator can be 
configured to re-authenticates the supplicant periodically. If re-authentication is enabled, the supplicant is 
required to re-authenticate every 3600 seconds, but this interval can be configured. A maximum number of 
re-authentications can be configured as well.
To configure a re-authentication or a re-authentication period:
To configure a maximum number of re-authentications:
Step Task Command Syntax Command Mode
1 Configure the authenticator to 
periodically re-authenticate the 
supplicant.
dot1x reauthentication [interval] seconds
Range: 1-65535
Default:3600
INTERFACE
Step Task Command Syntax Command Mode
1 Configure the maximum number of 
times that the supplicant can be 
reauthenticated.
dot1x reauth-max number
Range: 1-10
Default: 2
INTERFACE










