Reference Guide

Content Addressable Memory (CAM) | 271
FTOS#show running-config cam-profile
!
cam-profile default microcode default
FTOS#
View CAM-ACL settings
The show cam-acl command is supported on platforms c s
View the current cam-acl settings for the C-Series, S-Series and systems chassis and each component using
the command
show cam-acl, as shown in as shown in the following examples.
The default values for the
show cam-acl command for C-Series and S-Series are:
FTOS# show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 2
Ipv4Qos : 2
L2Qos : 2
L2PT : 1
IpMacAcl : 2
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
-- Line card 0 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 2
Ipv4Qos : 2
L2Qos : 2
L2PT : 1
IpMacAcl : 2
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
-- Line card 6 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 2
Ipv4Qos : 2
L2Qos : 2
L2PT : 1
IpMacAcl : 2
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
S4820T