Users Guide

Spanned outgoing interface list:
Vlan 20 (S)
Usage Information The following describes the show ip mroute command shown in the following example.
Field Description
(S, G) Displays the forwarding entry in the multicast route table.
uptime Displays the amount of time the entry has been in the multicast forwarding table.
Incoming interface Displays the reverse path forwarding (RPF) information towards the source for
(S,G) entries and the RP for (*,G) entries.
Outgoing interface
list:
Lists the interfaces that meet one of the following:
• a directly connected member of the Group
• statically congured member of the Group
• received a (*,G) or (S,G) Join message
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 3/12
Outgoing interface list:
TenGigabitEthernet 3/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: TenGigabitEthernet 3/4
Outgoing interface list:
TenGigabitEthernet 3/12
TenGigabitEthernet 3/13
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: TenGigabitEthernet 3/12
Outgoing interface list:
TenGigabitEthernet 3/4
show ip rpf
View reverse path forwarding.
S4820T
Syntax
show ip rpf
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
1018
Multicast