Users Guide
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The password is listed in the conguration le; you can view the password by entering the show
running-config ftp command.
Use the ip ftp password command when you use the ftp: parameter in the copy command.
Related Commands
copy — copy les.
ip ftp username — sets the user name for the FTP sessions.
ip ftp vrf
Congures an FTP client with a VRF that is used to connect to the FTP server.
Syntax
ip ftp [vrf vrf-name]
To undo the FTP client conguration, use the ip ftp [vrf vrf-name] command.
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to specify the VRF that is
used by the FTP client.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage Information Use this command to make the FTP clients VRF-aware. The VRF name that you specify is used by the FTP
client to reach the FTP server. If no VRF name is specied, then the default VRF is used.
Control and Monitoring
105