Users Guide

auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
S4820T
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost
[reference-bandwidth] command.
Parameters
ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per second. The range is
from 1 to 4294967. The default is 100 megabits per second.
Defaults 100 megabits per second.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ip ospf
Clear all OSPF routing tables.
S4820T
Syntax
clear ip ospf process-id [vrf vrf-name] [process]
Parameters
process-id Enter the OSPF Process ID to clear a specic process. If no Process ID is entered,
all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf and then the name of the VRF to clear all OSPF routing
tables corresponding to that VRF.
process (OPTIONAL) Enter the keyword process to reset the OSPF process.
Command Modes EXEC Privilege
Open Shortest Path First (OSPFv2 and OSPFv3)
1055