Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ip ospf statistics
Clear the packet statistics in interfaces and neighbors.
S4820T
Syntax
clear ip ospf [process-id] [vrf vrf-name] statistics [interface name
{neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to clear a specic process. If no Process ID is entered,
all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to clear all OSPF routing
tables corresponding to that VRF.
statistics Enter the keyword statistics to clear the packet statistics in interfaces and
neighbors.
interface name (OPTIONAL) Enter the keyword interface then one of the following interface
keywords and slot/port or number information:
• For Port Channel groups, enter the keywords port-channel then a number.
For the C-Series and S-Series, the range is from 1 to 128.
•
For a SONET interface, enter the keyword sonet then the slot/ port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to 4094.
1056
Open Shortest Path First (OSPFv2 and OSPFv3)